Lista YTL:n vastuukomiteoiden julkaisemia SFS- ja ISO-standardeja.

Kesä- heinäkuu 2024

Liikenne

• SFS-EN 16116-2:2024:en Railway applications. Design requirements for steps, handrails and associated access for staff. Part 2: Freight wagons Korvaa: SFS-EN 16116-2:2021:en:2021
• SFS-EN 15877-1:2024:en Railway applications. Markings of railway vehicles. Part 1: Freight wagons Korvaa: SFS-EN 15877-1:2012 + A1:2018:en:2018
• SFS-EN 16186-8:2022 + A1:2024:en Railway applications. Driver’s cab. Part 8: Tram vehicle layout and access Korvaa: SFS-EN 16186-8:2022:en:2022
• SFS-EN 16986:2024:en Electronic fee collection. Interoperable application profiles for information exchange between service provision and toll charging Korvaa: CEN/TS 16986:2016:en:2016 Korvaa: CEN/TS 16986:2016/AC:2017:en:2017
• ISO 15784-2:2024 Intelligent transport systems — Data exchange involving roadside modules communication — Part 2: Centre to field device communications using Simple Network Management Protocol (SNMP)
• ISO/TR 21734-3:2024 Intelligent transport systems — Performance testing for connectivity and safety functions of automated driving buses in public transport — Part 3: Service framework and use cases
• ISO/TS 22741-2:2024 Intelligent transport systems — Roadside modules AP-DATEX data interface — Part 2: Generalised field device basic management
• ISO 24671:2024 Road vehicles — Qualification and certification of technical personnel dealing with natural gas vehicles (NGVs)
• ISO 2575:2021/Amd 1:2024 Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 1
• ISO 24605:2024 Road vehicles — Dimethyl ether (DME) refuelling connector with pressure equalizing port
• ISO 11565:2024 Road vehicles — Spark-plugs — Test methods and requirements
• ISO 11451-3:2024 Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: On-board transmitter simulation
• ISO 5474-1:2024 Electrically propelled road vehicles — Functional and safety requirements for power transfer between vehicle and external electric circuit — Part 1: General requirements for conductive power transfer
• ISO 5474-2:2024 Electrically propelled road vehicles — Functional and safety requirements for power transfer between vehicle and external electric circuit — Part 2: AC power transfer
• ISO 5474-3:2024 Electrically propelled road vehicles — Functional and safety requirements for power transfer between vehicle and external electric circuit — Part 3: DC power transfer
• ISO 6626-1:2024 Internal combustion engines — Piston rings — Part 1: Coil spring loaded oil control rings made of cast iron
• ISO 7299-1:2024 Diesel engines — End-mounting flanges for pumps — Part 1: Fuel injection pumps
• ISO 2958:2024 Road vehicles — Exterior protection for passenger cars
• ISO 14813-1:2024 Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 1: ITS service domains, service groups and services
• ISO 24089:2023/Amd 1:2024 Road vehicles — Software update engineering — Amendment 1
• ISO/TS 19321:2024 Intelligent transport systems — Cooperative ITS — Dictionary of in-vehicle information (IVI) data structures
• ISO 23793-1:2024 Intelligent transport systems — Minimal risk manoeuvre (MRM) for automated driving — Part 1: Framework, straight-stop and in-lane stop
• ISO 21219-7:2024 Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 7: Location referencing container (TPEG2-LRC)
• ISO 6626-2:2024 Internal combustion engines — Piston rings — Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron

Terveydenhuolto

• SFS-EN 1865-2:2024:en Patient handling equipment used in ambulances. Part 2: Power assisted stretcher Korvaa: SFS-EN 1865-2 + A1:en:2015
• SFS-EN ISO 18113-1:2024:en In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling). Part 1: Terms, definitions, and general requirements (ISO 18113-1:2022) Korvaa: SFS-EN ISO 18113-1:2012 Korvaa: SFS-EN ISO 18113-1:en:2012
• SFS-EN ISO 18113-2:2024:en In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling). Part 2: In vitro diagnostic reagents for professional use (ISO 18113-2:2022) Korvaa: SFS-EN ISO 18113-2:2012 Korvaa: SFS-EN ISO 18113-2:en:2012
• SFS-EN ISO 18113-3:2024:en In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling). Part 3: In vitro diagnostic instruments for professional use (ISO 18113-3:2022) Korvaa: SFS-EN ISO 18113-3:2012 Korvaa: SFS-EN ISO 18113-3:en:2012
• SFS-EN ISO 18113-4:2024:en In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling). Part 4: In vitro diagnostic reagents for self-testing (ISO 18113-4:2022) Korvaa: SFS-EN ISO 18113-4:2012 Korvaa: SFS-EN ISO 18113-4:en:2012
• SFS-EN ISO 18113-5:2024:en In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling). Part 5: In vitro diagnostic instruments for self-testing (ISO 18113-5:2022) Korvaa: SFS-EN ISO 18113-5:2012 Korvaa: SFS-EN ISO 18113-5:en:2012
• SFS-EN 556-1:2024:en Sterilization of medical devices. Requirements for medical devices to be designated ”STERILE”. Part 1: Requirements for terminally sterilized medical devices Korvaa: SFS-EN 556-1:en:2002
• SFS-EN ISO 15098:2024:en Dentistry. Dental tweezers (ISO 15098:2024) Korvaa: SFS-EN ISO 15098:2020:en:2020
• ISO/TS 6838:2024 Ophthalmic optics — Contact lenses — Tolerances and methods for measurement of multifocal contact lens addition power
• ISO 15098:2024 Dentistry — Dental tweezers
• ISO 5910:2024 Cardiovascular implants and extracorporeal systems — Cardiac valve repair devices
• ISO 6559:2024 Traditional Chinese medicine — Sterile three-edge needle for single use
• ISO 9299:2024 Traditional Chinese medicine — Curcuma longa rhizome
• ISO/TS 23961-3:2024 Traditional Chinese medicine — Vocabulary for diagnostics — Part 3: Abdomen
• ISO 11040-7:2024 Prefilled syringes — Part 7: Packaging systems for sterilized subassembled syringes ready for filling
• ISO 11040-4:2024 Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
• ISO 80369-2:2024 Small-bore connectors for liquids and gases in healthcare applications — Part 2: Connectors for respiratory applications
• ISO 7197:2024 Neurosurgical implants — Sterile, single-use hydrocephalus shunts
• ISO 17256:2024 Anaesthetic and respiratory equipment — Respiratory therapy tubing and connectors
• ISO 5362:2024 Anaesthetic and respiratory equipment – Anaesthetic reservoir bags
• ISO 23500-2:2024 Preparation and quality management of fluids for haemodialysis and related therapies — Part 2: Water treatment equipment for haemodialysis applications and related therapies
• ISO/TR 11826:2024 Ophthalmic optics — Spectacle lenses — Aspects of three-dimensional properties and reference markings
• ISO 13615:2024 Traditional Chinese medicine — Atractylodes macrocephala rhizome

Vapaa-aika

• SFS-EN 958:2024:en Mountaineering equipment. Energy absorbing systems for use in klettersteig (via ferrata) climbing. Safety requirements and test methods Korvaa: SFS-EN 958:2017:en:2017
• SFS-EN 915:2024:en Gymnastic equipment. Asymmetric bars. Requirements and test methods including safety Korvaa: SFS-EN 915:en:2009
• ISO 10256-2:2024 Protective equipment for use in ice hockey — Part 2: Head protectors for skaters
• ISO 10256-3:2024 Protective equipment for use in ice hockey — Part 3: Face and eye protectors for skaters
• ISO 10256-1:2024 Protective equipment for use in ice hockey — Part 1: General requirements
• ISO 10256-4:2024 Protective equipment for use in ice hockey — Part 4: Head and face protectors for goalkeepers

Ympäristö

• SFS-EN ISO 4349:2024:en Solid recovered fuels. Determination of the Recycling Index for co-processing (ISO 4349:2024)