YTL:n toimialueella on käynnissä äänestyksiä seuraavien uusien työkohteiden aloittamisesta. Äänestyksissä kysytään kantaa ehdotuksen hyväksymisestä CENin(avautuu uuteen ikkunaan, siirryt toiseen palveluun) tai ISOn(avautuu uuteen ikkunaan, siirryt toiseen palveluun) teknisen komitean työohjelmaan ja kansallisia asiantuntijoita ehdotusta laativaan työryhmään. Myös kommentteja ehdotuksen sisältöön voi antaa. Mikäli ehdotus saa äänestyksessä riittävästi kannatusta, standardisointityö käynnistetään nimettävistä asiantuntijoista muodostettavassa työryhmässä.

Liikenne

• ISO/PWI 23300-3 Railway infrastructure — Rail welding — Part 3: Gas pressure welding
• prEN XXX Hyperloop systems. General requirements
• prEN XXX Hyperloop vocabulary definitions
• prEN 13616-2 rev Overfill prevention devices for static tanks for liquid fuels. Part 2: Overfill prevention devices without a closure device
• prEN 13160-8 Leak detection systems – Part 8: Pressure vacuum systems for storage of oil for cooling and heating of buildings
• prEN 13160-2 rev Leak detection systems. Part 2: Requirements and test/assessment methods for pressure and vacuum systems
• prEN 13160-7 rev Leak detection systems. Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
• prEN 13160-9 Leak detection systems – Part 9: Linings for storage of oil for cooling and heating of buildings
• prEN 13160-3 rev Leak detection systems. Part 3: Requirements and test/assessment methods for liquid systems for tanks
• prEN 13160-4 rev Leak detection systems. Part 4: Requirements and test/assessment methods for sensor based leak detection systems
• prEN 13160-5 rev Leak detection systems. Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
• prEN 13160-1 rev Leak detection systems. Part 1: General Principles
• prEN 13160-6 rev Leak detection systems. Part 6: Sensors in monitoring wells
• prEN 721 rev Leisure accommodation vehicles. Safety ventilation requirements
• ITS Standardisation requirements for Freight, Logistics and Commercial Vehicle Operations
• ITS Standardisation requirements for Intelligent Truck Parking Information and Reservations services
• Electronic fee collection. Secure monitoring for autonomous toll systems. Trusted recorder
• Framework Architecture, Roles and Responsibilities to support Intelligent Truck Parking Information and Reservations services.
• Road transport and traffic telematics. Electronic fee collection (EFC). Information flows between operators of EFC systems  
• Public transport. European ticketless and ticket on departure for rail distribution
• Traffic and travel information (TTI). TTI via Transport Protocol Expert Group (TPEG). Second generation (TPEG 2) multi-part series
• Road transport and traffic Telematics. Traffic management systems. Detection on Motorways for Traffic Information and Traffic Management Applications
• prCEN/TS 13149-9 Public Transport. Road Vehicle Scheduling and Control Systems. Part 9: IP-based Networking Inside A Vehicle, Information Services
• Intelligent transport systems. eCall. Quality of service requirements
• Intelligent transport systems. eSafety. Third Party Emergency Support Services
• Public transport. Network and Timetable Exchange (NeTEx)
• Intelligent transport systems. Co-operative systems. Co-operative system application messages, protocols and profiles
• Intelligent transport systems. Public transport. Implementation specifcations for IFM Systems
• prEN 12896-4 Public transport. Public Transport Reference Data Model. Part 4
• Intelligent transport systems. Travel and traffic information. A multiple/cross-domain commonly agreed interface
• prCEN/TS 15531-5 rev Public transport. Service interface for real-time information relating to public transport operations. Part 5: Functional service interfaces: Situation exchange
• Intelligent transport systems. Aftermarket eCall
• Electronic fee collection. Pre-study of the potential use of ITS-G5 and LTEV2X
• Public transport. Interoperable fare management system. Back Office Interface
• Intelligent transport systems. Dynamic events and map database specifications for applications of automated driving systems, cooperative ITS, and advanced road/traffic management systems (ISO/PWI 22726)
• XXXXX-5 Intelligent transport systems. eSafety. Aftermarket eCall for category L1 & L3 (P2WV) vehicles
• XXXXX-1 Intelligent transport systems. eSafety. Aftermarket eCall for UNECE category M1/N1 vehicles
• XXXXX-2 Intelligent transport systems. eSafety. Aftermarket eCall for large goods vehicles (UNECE Category N2 and N3) and other commercial vehicles
• XXXXX-6 Intelligent transport systems. eSafety. Aftermarket eCall for L vehicle categories (Powered 2/3/4 Wheel) vehicles -rider based
• CEN ISO 14827-4 Transport information and control systems. Data interfaces between centres for transport information and control systems. Part 4: Data interfaces between centres for intelligent transport systems (ITS) using XML (Profile B)
• XXXXX-3 Intelligent transport systems – eSafety. Aftermarket eCall for M2 and M3 vehicle categories buses and coaches
• prCEN/TS 17249-6 rev Intelligent transport systems. eSafety. Part 6: eCall for UNECE Category L2, L4, L5, L6 and L7 tricycles and quadricycles
• XXXXX-4 Intelligent transport systems. eSafety. Aftermarket eCall for UNECE categories for agricultural and forestry vehicles and equipment
• Intelligent transport systems – ITS spatial data – Data model and data dictionary for the exchange of vehicle-based sensor data
• prCEN/TS 16157-11 rev Intelligent transport systems. DATEX II data exchange specifications for traffic management and information. Part 11: Publication of machine interpretable traffic regulations
• Tanks for transport of dangerous goods. Pressure testing of metallic tanks with gas
• prEN 14433 rev  Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals. Foot valves
• prEN 14512 rev Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals. Hinged manhole covers and neckrings with pivoting bolts
• Feasibility study to explore the use of real mail data in measurement of the transit time of end-to-end services for single piece cross-border priority mail
• Postal services. Hybrid Mail. Extension of the postal service provision into the Internet
• Postal services. Hybrid mail. Reverse hybrid mail standardisation
• Postal services. Postal drone delivery services
• Postal services.  EMAI Universal Identifier for postal items
• Postal services-Harmonized track and trace events. Part 2: Harmonization of track and trace events -Return flow
• prEN 15472 Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing
• Postal services. methods for proof od delivery of postal items whithout physical signature
• Parcel Delivery Environmental Footprint
• prEN 14615 rev Postal services. Digital postage marks. Applications, security and design
• Postal services. methods for proof od delivery of postal items whithout physical signature
• prEN ISO 15118-8 Road vehicles. Vehicle to grid communication interface. Part 8: Physical layer and data link layer requirements for wireless communication 
• prEN ISO 15118-6 Road vehicles. Vehicle to grid communication interface. Part 6: General information and use-case definition for wireless communication 
• prEN ISO 15118-7 Road vehicles. Vehicle to grid communication interface. Part 7: Network and application protocol requirements for wireless communication 
• prEN ISO 15118-5 Road vehicles. Vehicle to grid communication interface. Part 5: Physical layer and data link layer conformance test
• prEN ISO 15118-4 Road vehicles. Vehicle to grid communication interface. Part 4: Network and application protocol conformance test
• prEN 16662-2 Road vehicles. Supplementary grip devices for tyres of passenger cars and light duty vehicles.  Part 2 : Specific test procedures for metallic SGDs.
• Road vehicles. Supplementary grip devices for tyres of passenger cars and light duty vehicles -Part 4 : Specific test procedures for net Supplementary grip devices 
• Road vehicles. Supplementary grip devices for tyres of passenger cars and light duty vehicles -Part 3 :  Specific test procedures for fabric Supplementary grip devices 
• prEN 16662-5 Road vehicles. Supplementary grip devices for tyres of passenger cars and light duty vehicles. Part 5: Specific test procedures for polimer/polimer hybrid Supplementary grip devices.  
• Railway applications. Infrastructure. Machines without rail wheels and associated equipment, intended for work on the railway infrastructure. Part 2: General safety requirements
• Railway applications. Ground based services. Hydrogen refuelling equipment
• prEN 45545-1 rev Railway applications. Fire protection on railway vehicles. Part 1: General
• prEN 13749 rev Railway applications. Wheelsets and bogies. Structural requirements of bogie frames
• Railway applications. Axleboxes – Bearings with rotating outer ring prEN 15734-2 rev Railway applications. Braking systems of high speed trains. Part 2: Test methods
• prEN 16729-1 rev Railway applications. Infrastructure. Non-destructive testing on rails in track. Part 1: Requirements for ultrasonic inspection and evaluation principles
• Railway applications. Acoustics- Long term noise measurements
• prCEN/TR 14363-6 Railway applications — Testing and Simulation for the assessment of running characteristics of railway vehicles . Part 6: Technical Report providing background information to the EN 14363 series of standards
• Railway applications. Guidance for the use of simulations. Guidance for the use of simulations to demonstrate compliance with technical and regulatory requirements and on the introduction and development of simulation requirements into standards
• prEN 14363 rev Railway applications. Testing and Simulation for the acceptance of running characteristics of railway vehicles. Running Behaviour and stationary tests
• prEN 45545-5 rev Railway applications. Fire protection on railway vehicles. Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
• prEN 45545-7 rev Railway applications. Fire protection on railway vehicles. Part 7: Fire safety requirements for flammable liquid and flammable gas installations
• prEN 45545-2 rev Railway applications. Fire protection on railway vehicles. Part 2: Requirements for fire behaviour of materials and products
• Railway applications – Infrastructure. Track switches and crossings for urban rail systems compatible with tramway wheel profiles
• Railway applications – Ride Comfort for Passengers in Trams and Metros — Measurement and evaluation
• prEN 13674-2 rev Railway applications. Track. Rail. Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above
• prEN 14067-6 rev Railway applications. Aerodynamics. Part 6: Requirements and test procedures for cross wind assessment
• prEN 16727-2-1 rev Railway applications. Infrastructure- Noise barriers and related devices acting on airborne sound propagation. Non-acoustic performance. Part 2-1: Mechanical performance under dynamic loadings due to passing trains. Resistance to fatigue
• Railway applications. Scotch blocks or wheel chocks used in both freight and passenger rail
• EN 16432-4, Railway applications — Infrastructure — Ballastless track systems — Part 4: Special ballastless track systems for attenuation of vibration NULL Railway applications. Brake system of locomotives. Test methods
• EN 16186-9, Railway applications. Driver’s cabs – Part 9 : External visibility for metro vehicles
• prEN 17420 Railway applications — Vehicle end design for trams with respect to pedestrian safety
• prEN 15723 rev Railway applications. Closing and locking devices for payload protecting devices against environmental influences. Requirements for durability, operation, indication, maintenance, recycling
• prEN 16452 rev Railway applications. Braking. Brake blocks
• prEN 16185-2 rev Railway applications. Braking systems of multiple unit trains. Part 2: Test methods prEN 16834 rev Railway applications. Braking. Brake performance
• Railway applications. Braking – Emergency push button
• prEN 15427-1-3 Railway applications. Wheel/Rail friction management. Part 1-3: Equipment and Application. Adhesion materials
• prEN 15624 rev Railway applications. Braking. Empty-loaded changeover devices
• prEN 13481-1 rev Railway applications. Track. Performance requirements for fastening systems. Part 1: Definitions
• prEN 15528 rev Railway applications. Line categories for managing the interface between load limits of vehicles and infrastructure
• EN 16432-4 Railway applications. Ballastless track systems. Part 4: Special ballastless track systems for attenuation of vibration
• Railway applications. Track. Switches and crossings. Mechanical requirements for actuation, locking and detection systems
• Railway applications. Wheel/Rail Friction Management. Top of Rail. Equipment and Application  
• Railway applications. Investigations on vehicles to quantify running behaviour on lines with a geometric track quality representative of lines with an admissible speed = 80 km/h
• prEN 15625 rev Railway applications. Braking. Automatic variable load sensing devices
• prEN 15551 rev Railway applications. Railway rolling stock. Buffers
• Railway applications. Braking. Eddy current track brake systems
• Coding for railway business locations
• Numbering of and coding system for trains
• Coding for railway undertakings, infrastructure managers and other companies, involved in the rail transport chain
• Railway applications. Fire protection on railway vehicles. Assessment of fire containment and control systems for railway vehicles
• Coding for customers in the rail transport chain
• Railway applications. Fire protection on railway vehicles. Assessment of fire containment and control systems for railway vehicles
• Railway applications. Rescue coupling for Trams and Light Rail. Functional requirements
• prEN 13272 rev Railway applications. Electrical lighting for rolling stock in urban rail applications
• Railway applications. Requirements for trackside boards. Part 1: General requirements for trackside boards visibility
• Railway applications. Requirements for trackside boards. Part 2: ERTMS trackside boards
• prEN 14531-3 Railway applications. Methods for calculation of stopping distances, slowing distances and immobilization braking. Part 3: Application to mass transit
• Railway applications. NDT on rails in track. Part 2: Requirements for describing and identifying internal and surface rail defects
• prEN 14750-2 rev Railway applications. Air conditioning for urban and suburban rolling stock. Part 2: Type tests
• prEN 15328 Railway applications. Braking. Brake pads
• prEN 14813-1 rev Railway applications. Air conditioning of driving cabs. Part 1: Comfort parameters
• Railway applications. Air conditioning for rolling stock. Safety relevant aspects
• prEN 14531-2 Railway applications. Methods for calculation of stopping distances, slowing distances and immobilization braking. Part 2: Application to Single Freight Wagon
• prEN 16432-3 Railway applications. Ballastless track systems. Part 3: Acceptance
• prEN 14750-1 rev Railway applications. Air conditioning for urban and suburban rolling stock. Part 1: Comfort parameters
• prEN 14813-2 rev Railway applications. Air conditioning for driving cabs. Part 2: Type tests
• prEN ISO 3381 rev Railway applications. Acoustics. Measurement of noise inside railbound vehicles
• prEN 13129-1 rev Railway applications. Air conditioning for main line rolling stock. Part 1: Comfort parameters
• prEN 13129-2 rev Railway applications. Air conditioning for main line rolling stock. Part 2: Type tests
• prEN 13230-2 rev Railway applications. Infrastructure. Concrete sleepers and bearers. Part 2: Prestressed monoblock sleepers
• prEN 13230-6 rev Railway applications. Infrastructure. Concrete sleepers and bearers. Part 6: Design
• ISO/NP 19083-3 Intelligent transport systems — Public transport — Emergency evacuation and disaster response and recovery  — Part 3: Use cases
• ISO/NP TS 17424 Intelligent transport systems — Cooperative systems — Definition of a global concept for Local Dynamic Maps 
• ISO/NP 17185-8 Intelligent transport systems  — Part 8: Framework message architecture
• ISO/NP 17185-6 Intelligent transport systems  — Part 6: Modelling stops and network topology
• ISO/NP 17185-7 Intelligent transport systems  — Part 7: Conformance test of interoperable fare management system (ISO 24014-1)
• ISO/NP 17185-5 Intelligent transport systems  — Part 5: Governance of mandatory public transport standards
• ISO/NP 18378 Intelligent Transport Systems — Communications access for land mobiles (CALM) – Multicast  ISO/NP 18376 Intelligent Transport Systems — Criteria for Privacy and Integrity protection in Probe Vehicle Information Systems 
• ISO/NP TS 25114 Intelligent transport systems — Probe data reporting management (PDRM) 
• ISO/NP 22837 Vehicle probe data for wide area communications  ISO/NP 18380 Intelligent Transport Systems — Communications access for land mobiles (CALM) – IPv4-IPv6 interoperability 
• ISO/NP 24531-2 Intelligent transport systems — System architecture, taxonomy and terminology  — Part 2: Using ASN.1 in ITS standards, data registries and data dictionaries
• ISO/NP 23300-3 Railway applications — Rail Welding  — Part 3: Gas pressure welding
• ISO/NP 23300-2 Railway applications — Rail Welding  — Part 2: Aluminothermic welding
• ISO/NP TS 24315-3 Intelligent transport systems — Management of electronic traffic regulations (METR) — Part 3: System of systems requirements and architecture (SoSR)
• ISO 12777-1:1994/NP Amd 2 Methods of test for pallet joints  — Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples
• ISO/NP 24298 Intelligent transport systems — Public transport — Light emitting diode (LED) destination board system for public transport buses
• ISO/NP 24491.2 Railway applications — Passenger seats for heavy rail rolling stock
• ISO/NP 22083 Railway applications — Concepts and basic requirements for the planning of railway operation in the events of predictable natural hazards
• ISO/NP 21864 Road vehicles — Measurement and Analysis of driver visual behaviour with respect to transport information and control systems 
• ISO/NP 17748-3 Intelligent transport systems — Energy-based green ITS services for smart city mobility applications via nomadic and mobile devices — Part 3: Part 3: Data exchange requirements for electric vehicles (EV)-based demand response charging services
• ISO/NP TS 17748-2 Intelligent transport systems — Nomadic and mobile devices — Energybased green ITS services for smart city mobility applications — Part 2: Part 2: Functional requirements of data platform
• ISO/NP 22577 Intelligent transport systems — Nomadic and mobile devices — In-vehicle passenger monitoring and care services using deep learning technology
• ISO/NP 21205 Intelligent Transport Systems — Secure vehicle interface — Communication profiles for secure connection between an ITS-station and a vehicle 
• ISO/NP 17739-3 Intelligent transport systems — Roadside infrastructure supported locationbased services for connected automated mobility via nomadic and mobile devices — Part 3: Part 3: No turn on red (NTOR) at junctions with traffic signals
• ISO/NP 17739-2 Intelligent transport systems — Nomadic & mobile devices — Roadside infrastructure supported location-based services for connected automated mobility — Part 2: Part 2: Data structure and message set definition
• ISO/NP PAS 21734-3 Public transport — Performance testing for connectivity and safety functions of automated driving bus  — Part 3: Service framework and uses cases
• ISO/NP 6029-2 Intelligent transport systems — Seamless positioning for multimodal transportation in ITS stations — Part 2: Nomadic and mobile device dataset for positioning data fusion
• ISO/NP TS 5616 Intelligent transport systems — Secure interfaces governance — Minimum requirements and governance procedures
• ISO/NP 21196 Intelligent Transport Systems — Secure vehicle interface — ITS-station security services for secure session establishment and authentication 
• ISO/NP 6900 Road vehicles — Safety glazing materials — Test methods for electron-switchable visibility control glazing and electrochromic glazing
• ISO/NP 16675 Road vehicles — Standardized automotive repair and maintenance information (RMI) terminology 
• ISO/NP 16674 Road vehicles — Standardized access to automotive repair and maintenance information (RMI) 
• ISO/NP 23987-1.2 Railway Infrastructure–Switches and crossings — Part 1: Terms and definitions

Terveydenhuolto

• ISO/PWI 11979-2 Ophthalmic implants — Intraocular lenses  — Part 2: Optical properties and test methods
• ISO/PWI 8980-6 Ophthalmic optics — Uncut finished spectacle lenses — Part 6: Requirements and test methods for claimed performances
• ISO/PWI 10542-1 Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 1: Requirements and test methods for all systems
• ISO/PWI 19351 Mechanical female contraceptive devices — Tubal ligation/Fallopian rings 
• ISO/PWI 7835 Traditional Chinese medicine — Schisandra chinensis fruit
• ISO/PWI TS 12121 Traditional Chinese medicine — Guide to the language usage in terminology work
• ISO/PWI 19661 Traditional Chinese Medicine–Anemarrhena asphodeloides rhizome
• ISO/PWI TS 10671.2 Traditional Chinese medicine — Information model for dispensary preparation of decocted herbal medicines
• ISO/PWI TS 11176 Traditional Chinese medicine — Chemical profiling methods of herbal medicines using chromatographic fingerprinting
• ISO/PWI 8961 Traditional Chinese Medicine–Areca catechu seed
• ISO/PWI TS 23403 Traditional Chinese medicine — Categorial structure for patterns
• Animal health diagnostic analyses. Control of in vitro diagnostic reagents – Part 3: Reagents for PCR techniques
• Vapour products. Requirements and test methods for emission
• Vapour products. Extractables and leachables assessment in vaping products
• Vapour products. User information of refill containers and cartridges
• Vapour products. Child safety requirements and test methods for electronic cigarettes
• Vapour products. Analytical methods to measure mass of e-liquids vaporised
• Vapour products. Analytical methods to measure metals of electronic cigarettes emissions
• Vapour products. Electronic cigarettes and e-liquids. Terms and definitions
• Vapour products. Analytical methods to measure carbonyls of electronic cigarettes emissions
• Vapour products. Ingredients and user information
• Vapour products. Standardized test atomiser
• Vapour products. Requirements and test methods for emissions
• Vapour products. Analytical methods to measure nicotine of electronic cigarettes emissions
• Steam sterilizers. General requirements
• EN 14820:2004/prA1 Single-use containers for human venous blood specimen collection
• EN ISO 15195:2003/prA1 Laboratory medicine. Requirements for reference measurement laboratories (ISO 15195:2003)
• prEN 1659 In vitro diagnostic systems. Culture media for microbiology. Terms and definitions
• prEN 13641 Elimination or reduction of risk of infection related to in vitro diagnostic reagents
• Haematology. Determination of the concentration of total haemoglobin in blood. Reference methods
• prEN ISO 15190 Medical laboratories. Requirements for safety
• prEN 12322 In vitro diagnostic medical devices. Culture media for microbiology. Performance criteria for culture media
• prEN 13532 General requirements for in vitro diagnostic medical devices for self-testing
• Molecular in vitro diagnostic examinations. Procedures for Laboratory Andrology. Human Semen Analysis
• Quality assurance of POCT results. Assessment criteria for comparison measurement and implementation
• Tactile lettering — Requirements on the presentation and application of Braille and raised lettering 
• prEN ISO 29474 Dentistry. Fluoride varnishes
• Dentistry. Brackets and tubes for use in orthodontics
• Dentistry. Root-canal systems. Part 4: Auxiliary instruments
• prEN ISO 17254 Dentistry. Springs for use in orthodontics
• prEN ISO 16506 Dentistry. Polymer-based luting materials containing adhesive components
• prEN ISO 18498 Dentistry. Test method for flexural strength of endodontic post and cores
• Certification scheme for EN 15224 Health care services. Quality management systems. Requirements based on ISO 9001:2008
• Assistance Dogs – Client Services
• Privacy and information security for social care alarms
• Contingency management for social care alarms
• Guidelines for handling communication service for social care alarms
• Informing the user and procedures for handling the social care alarm
• prEN ISO 8598-3 Optics and optical instruments. Focimeters. Part 3: Special purpose instruments
• Respiratory infection prevention devices for self- and third party protection. Requirements and test methods
• prEN 1618 rev Catheters other than intravascular catheters. Test methods for common properties
• prEN 13726-6 rev Non-active medical devices. Test methods for primary wound dressings  – Part 6: Odour control
• prEN 13726-5 Non-active medical devices. Test methods for primary wound dressings. Part 5: Bacterial barrier properties
• prEN 13726-1 rev Non-active medical devices. Test methods for primary wound dressings  – Part 1: Aspects of absorbency
• prEN 13726-3 rev Non-active medical devices. Test methods for primary wound dressings  – Part 3: Waterproofness
• prEN 13726-4 rev Non-active medical devices. Test methods for primary wound dressings. Part 4: Conformability
• Medical gloves.
• prEN 13726-2 rev Non-active medical devices. Test methods for primary wound dressings. Part 2: Moisture vapour transmission rate of permeable film dressings 
• Chemical disinfectants and antiseptics. Quantitative carrier test for the evaluation of bactericidal activity for non-porous surfaces in the medical area. Test method and requirements (phase 2, step 2)
• Chemical disinfectants and antiseptics. Quantitative suspension test for the valuation of sporicidal activity of chemical disinfectants and antiseptics used in the veterinary field. Test method and requirements (phase 2/step 1) 
• Chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in veterinary area on porous surfaces without mechanical action – Test method and requirements (phase 2, step 2)
• Chemical disinfectants and antiseptics. Medical instrument disinfectants. Sporicidal activity. Test method and requirements (phase 2/step 2)
• Chemical disinfectants and antiseptics. Instrument disinfectants used in human medicine. Virucidal activity. Test method and requirements (phase 2/step 2) 
• Chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in veterinary area on non-porous surfaces without mechanical action – Test method and requirements (phase 2, step 2)
• prEN 12791 rev Chemical disinfectants and antiseptics. Surgical hand disinfection. Test method and requirements (phase 2, step 2)
• Methods of airborne disinfection of surfaces. Determination of bactericidal, fungicidal, yeasticidal and sporicidal activity
• Chemical disinfectants and antiseptics. Quantitative non-porous surface test for the evaluation of virucidal activity of chemical disinfectants used in food, industrial, domestic, and institutional areas- Test method and requirements (phase 2, step 2) 
• Chemical disinfectants and antiseptics. Quantitative carrier test for the evaluation of sporicidal activity against anaerobic spores in the food, industrial, domestic and institutional areas. Test method and requirements (phase 2, step 2). 
• Chemical disinfectants and antiseptics. Quantitative test method for the evaluation of bactericidal, yeasticidal and fungicidal activities on non-porous surfaces with mechanical action employing wipes or mopes in food, industrial, domestic and institutional areas. Test method and requirements (phase 2, step 2) 
• Chemical Disinfectants and Antiseptics. Quantitative Carrier test for Airborne Room Disinfection by Manual Processes. Determination of Bactericidal, Fungicidal, Yeasticidal, Sporicidal, Tuberculocidal, Mycobactericidal, Virucidal and Phagocidal Activities in the Medical Area, Veterinary Area and Food, Industrial, Domestic and Institutional Areas. Test Methods and Requirements Phase 2, Step2
• Chemical disinfectants and antiseptics. Quantitative carrier test method for the evaluation of sporicidal activity of chemical disinfectants on hard non-porous surfaces in food, industrial, domestic and institutional areas. Test method and requirements (phase 2, step 2).
• prEN 1865-4 rev Patient handling equipment used in road ambulances. Part 4: Foldable patient transfer chair
• Patient handling equipment used in ambulances. Part 7: Biocontainment systems 
• prEN 1865-5 rev Patient handling equipment used in road ambulances. Part 5: Stretcher support
• prEN 14056 rev Laboratory furniture. Recommendations for design and installation
• EN 14175-9: Fume Cupboards – Part 9: Ducted filtration fume cupboards
• prEN ISO 384 Laboratory glass and plastics ware. Principles of design and construction of volumetric instruments 
• prEN ISO 16496 Laboratory glassware. Devices with vacuum-jacket insulation
• Laboratory glassware. Narrow-necked boiling flasks (prEN ISO 1773)
• prEN 12469 rev Biological safety cabinets
• Laboratory glassware. Condensers (prEN ISO 4799)
• Piston-operated volumetric apparatus. Part 6: Gravimetric  methods for the determination of measurement error (Revision of EN ISO 8655-6:2002)
• Piston-operated volumetric apparatus. Part 8: Motor-operated devices (prEN ISO 8655-8)
• Laboratory glassware. Test tubes (Revision of EN ISO 4142:2002)
• ISO/NP 18668-3 Traditional Chinese medicine — Coding System of Chinese Medicines  — Part 3: Codes of Chinese Material Medica
• ISO/NP 18668-4 Traditional Chinese Medicine — Coding System of Chinese Medicines  — Part 4: Codes of Granule Forms of Individual Medicinals for Prescriptions (GFIMP)
• IEC/NP 60601-2-47 Medical electrical equipment  — Part 2-47: Ambulatory ECG
• IEC/NP 60601-2-34 Medical electrical equipment  — Part 2-34: Invasive pressure
• IEC/NP 60601-2-25 Medical electrical equipment  — Part 2-25: Electrocardiographs
• IEC/NP 60601-2-27 Medical electrical equipment  — Part 2-27: ECG monitoring
• ISO/NP 7193 Wheelchairs — Maximum overall dimensions 
• ISO/NP 12103-4 Road vehicles — test contaminants for filter evaluation  — Part 4: Salt aerosol
• ISO/NP 10865-1 Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers  — Part 1: Systems for forward-facing wheelchair-seated passengers
• ISO/NP 7567 Tissue-engineered medical products — Quantification of type I collagen from bovine: Liquid chromatography- mass spectrometry
• Guidance on the relationship between CEN ISO TR 20146: 2019 (Medical devices — Post-market surveillance for manufacturers) and European Medical Devices Regulation and In Vitro Diagnostic Medical Devices Regulation
• ISO/NP 25558 Ageing societies — A Guide to enhancing safety and convenience for older persons in smart home environment
• ISO/NP 21684 ISO 20768, Vapour products — Routine analytical vaping machine — Definitions and standard conditions — Amendment 1: Correction of puff profile requirements
• ISO/NP 24685 Implants for surgery — Cranioplasty plates — Specific requirements for non-moldable plates I
• SO/NP 10542-1 Wheelchair tiedown and occupant restraint systems for use in all motor vehicles  — Part 1: Systems for forwardfacing wheelchair-seatd occupants
• ISO/NP 16840-11 Wheelchair seating — Part 11: Determination of perspiration dissipation characteristics of seat cushions intended to manage tissue integrity
• ISO/NP 80100 Respiratory care terminology and semantics 
• ISO/NP 22629 Quality and Safety Requirements and Test Methods for Recycled Pulp from Used Urine Absorbing Products
• ISO/NP 6335-1.2 Surgical instruments — Staplers — Part 1: Vocabulary
• ISO/NP 7554-2.3 Surgical instruments — Terms, measuring methods and tests — Part 2: Measuring methods for the determination of basic measures of surgical standard instruments
• ISO/NP 7554-3.3 Surgical instruments -Terms, measuring methods and tests — Part 3: Test methods I
• SO/NP 7554-1.3 Surgical instruments — Terms, measuring methods and tests — Part 1: Vocabulary
• ISO/NP 6335-2.2 Surgical instruments — Staplers — Part 2: General requirements
• ISO/NP TS 24883 Lateral flow immunoassay for rapid diagnostic testing — General guideline for test performance
• ISO/NP 24884 Electronic Instructions for Use for In Vitro Diagnostic Medical Devices (Minimum required information and means of delivery)
• ISO/NP 24282 Cigarettes — Determination of the intrinsic biodegradability of post-consumer waste of tobacco containing cigarettes with filters in soil
• ISO/NP 24299 Cigarettes — Determination of the intrinsic biodegradability of post-consumer waste of tobacco containing cigarettes with filters in marine environments
• ISO/NP 24051-1 Medical laboratories — Part 1: General principles for the application of artificial intelligence in medical laboratories
• ISO/NP 24051-2 Medical laboratories — Part 2: Digital pathology and artificial intelligence (AI)-based image analysis
• ISO/NP 24645 General requirements for Luer activated valves (LAVs) incorporated into medical devices for intravascular applications
• ISO/NP TR 16947 Guidance on the application of ISO 14971 
• ISO/NP 13659 Ophthalmic instruments – Instruments to measure the axial length of the eye 
• ISO/NP 19045-3 Ophthalmic optics — Contact lens care products — Part 3: Part 3: Method for evaluating disinfecting efficacy by contact lens care products using cysts of Acanthamoeba species as the challenge organisms
• ISO/NP TS 24891 Ophthalmic optics — Contact lenses and contact lens care products — Proposed symbols for use with contact lenses and lens care products
• ISO/NP 22440 Sterilization of health care products — Low temperature vaporized hydrogen peroxide — Requirements for the development, validation and routine control of a sterilization process for medical devices 
• ISO/NP 9287 Traditional Chinese Medicine — Curcuma Longa rhizome
• ISO/NP 24825 Traditional Chinese medicine — General principles for the establishment of herbal reference substances
• ISO/NP TS 24659-2 Traditional Chinese medicine — Clinical knowledge structure for diagnostic information — Part 2: Pulse
• ISO/NP 20255.2 Traditional Chinese medicine—-Epimedium brevicorum, Epimedium sagittatum, Epimedium pubescens, and Epimedium koreanum Herb
• ISO/NP TS 6307 Traditional Chinese medicine — Categorial structure for classification of disease — Part 1: Disorders 
• ISO/NP 7260 Dentistry — Protective filtering devices intended for use with powered polymerization activators
• ISO/NP 13670 Implants for surgery – Calcium phosphates – Part 3: Hydroxyapatite and beta-Tricalcium phosphate bone substitutes 
• ISO/NP 13669 Implants for surgery – Calcium phosphates – Part 2: beta-Tricalcium Phosphate Powders 
• ISO/NP 13172 Implants for surgery — In vitro evaluation for apatite-forming ability of implant materials 
• ISO/NP 13667 Implants for surgery – Calcium phosphates – Part 1: Hydroxyapatite powders 
• ISO/NP 10873 Dentistry — Denture adhesives
• ISO/NP 7711-3 Dentistry — Diamond rotary instruments  — Part 3: Shanks made of ceramics
• ISO/NP 24900 Traditional Chinese medicine — Sophora tonkinensis root and rhizome
• ISO/NP 24902 Traditional Chinese medicine — Zanthoxylum nitidum root
• ISO/NP TS 24659-1 Traditional Chinese medicine — Clinical knowledge structure for diagnostic information — Part 1: Tongue
• ISO/NP 24898 Traditional Chinese medicine–General requirements for the cultivation and primary processing of herbal materials
• ISO/NP 20364.2 Healthcare organization management — Guidance for healthcare organizations’ response to the surging diagnostic demands in a pandemic

Vapaa-aika

• Safe calculation in spectator facilities
• ISO/PWI 8442-10 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 10: Requirements for Stainless steel vacuum container
• ISO/PWI 13158.2 Martial arts — Wushu competition spear — Requirements and test methods
• ISO/PWI 13172.2 Martial arts — Wushu competition stick — Requirements and test methods
• prEN 13200-9 Communication systems in spectator facilities
• prEN 13200-6 rev Spectator facilities. Part 6: Demountable (temporary) stands
• Spectator facilities. Layout criteria of service area. Part 2: Characteristics and national situations 
• Surfaces for sports areas. Determination of Critical Fall Height for surface
• prEN 12230-2 Surfaces for sports areas. Part 2: Determination of vertical tensile strength of shockpads 25mm thick or greater
• prEN 12230-3 Surfaces for sports areas. Part 3: Determination of tensile strength of shockpads with slots and groves
• Surfaces for sports areas. Determination of Repeated Impact of Shockpads
• Determination of effects of skin contact in sport surfaces
• Determination of dust content in sport surfaces
• prEN 15301-1 rev Surfaces for sports areas. Part 1: Determination of rotational resistance
• prCEN/TS 16717 rev Surface for sports areas. Method of test for the determination of shock absorption, vertical deformation and energy restitution using the advanced artificial athlete
• Surfaces for sports areas. Compression properties of infill materials
• Surfaces for sports areas. Determination of horizontal drainage
• prEN 15330-1 rev Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor use. Part 1: Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use
• prEN 1969 rev Surfaces for sports areas. Determination of thickness of synthetic sports surfaces
• Surfaces for sports areas. Sport performances of Synthetic surfaces and Synthetic turf surfaces primarily designed for outdoor use installed indoors”
• prEN 1517 rev Surfaces for sports areas. Determination of resistance to impact
• prEN 1569 rev Surfaces for sports areas. Determination of the behaviour under a rolling load
• prEN 12230 rev Surfaces for sports areas. Determination of tensile properties of synthetic sports surfaces
• prEN 13746 rev Surfaces for sports areas. Determination of dimensional changes due to the effect of varied water, frost and heat conditions
• Surfaces for sports areas. Specification for Shockpads based on work and guideline published by European Synthetic Turf Organization
• prEN 13817 rev Surfaces for sports areas. Procedure for accelerated ageing by exposure to hot air
• Code of practice for the standard for the performance and quality of infills used within synthetic turf sports surfaces
• prEN 12616 rev Surfaces for sports areas. Determination of water infiltration rate
• prEN 15306 rev Surfaces for outdoor sports areas. Exposure of synthetic turf to simulated wear
• Surfaces for sports areas. Determination of ball roll behaviour
• prEN 12235 rev Surfaces for sports areas. Determination of vertical ball behaviour
• prEN 12233 rev Surfaces for sports areas. Determination of sward height of natural turf
• prEN 13864 rev Surfaces for sports areas. Determination of tensile strength of synthetic yarns
• prEN 926-2 rev Paragliding equipment. Paragliders. Part 2: Requirements and test methods for classifying flight safety characteristics
• prEN 566 rev Mountaineering equipment. Slings. Safety requirements and test methods
• prEN 568 rev Mountaineering equipment. Ice anchors. Safety requirements and test methods
• prEN 12277 rev Mountaineering equipment. Harnesses. Safety requirements and test methods
• Spa and Wellness centres for public use – Safety requirements and test methods
• prEN 1176-1 rev Playground equipment and surfacing. Part 1: General safety requirements and test methods
• Fitness trampolines for adults
• Fitness club. Requirements for equipment and operation. Part 1: General requirements
• Fitness centres. Requirements for equipment and operation. Part 4: Group exercise classes
• Functional Training Jungles
• Spas for public use
• Playing field equipment. Goals. Functional and safety requirements. Test methods for portable goals
• Playing field equipment. Goals. General requirements for procurement, installation, maintenance, inspection and storage
• Entrapment, crushing and shearing risk in sports, playground and other recreational facilities and equipment. Requirements and test methods
• Fitness centres. Requirements for equipment and operation. Part 3: Cardiotraining
• Fitness centers. Requirements for equipment and operation. Part 2: Strength training
• prEN 14960 rev Inflatable play equipment. Safety requirements and test methods
• prEN 1186-16 Methods of test for the determination of overall migration from plastic sealing gaskets on metal lids applied to glass jars and bottles 
• A method of test for the determination of volatile migrants in foods and in food simulants using headspace gas chromatography coupled to mass spectroscopy
• prEN 12983 Cookware. Domestic cookware for use on top of a stove, cooker or hob
• Mechanical dishwashing resistance of utensils. Rapid test for domestic metallic articles
• prEN 1388-2 rev Materials and articles in contact with foodstuffs. Silicate surfaces. Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
• Materials and articles in contact with foodstuffs – Plastics substances subject to limitation
• Materials and articles in contact with foodstuffs – Plastics substances subject to limitation
• EN 12983-1:2023/prA1 Cookware. Domestic cookware for use on top of a stove, cooker or hob. Part 1: General requirements
• Materials and articles in contact with foodstuffs – Reusable plastic tableware for food contact use – Definition and test method
• prEN 12875-1 rev Mechanical dishwashing resistance of utensils. Part 1: Reference test method for domestic articles
• prEN 1388-2 rev Materials and articles in contact with foodstuffs. Silicate surfaces. Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
• prEN 12875-2 rev Mechanical dishwashing resistance of utensils. Part 2: Inspection of non-metallic articles
• prEN 1388-1 rev Materials and articles in contact with foodstuffs. Silicate surfaces. Part 1: Determination of the release of lead and cadmium from ceramic ware
• ISO/NP TS 24865 Sport and other recreational facilities and equipment — Guidelines for addressing sustainability when applying ISO 4980
• ISO/NP 20686 Martial arts — Tai chi clothing — Requirements and test method 
• ISO/NP 20687 Material arts — Wushu sword — Requirements and test method 

Ympäristö

• prEN 14803 rev Identification and/or determination of the quantity of waste
• Waste management. Terms and definitions
• Guidelines for the compliance to REACH of ELT-derived materials
• prEN 14243-4 Materials obtained from end of life tyres. Part 4: Steel wires and textile fibres. Methods for their characterization
• Materials obtained from End of Life Tyres. Derived rubber. Determination of the PAH content and assessment of PAH migration through exposure
• Material obtained from End of Life Tyres  – Guideline for the determination of bulk density of granulates and powders
• Characterization of waste. Analysis of eluates. Determination of pH, Ammonium, AOX, conductivity, phenol index, TOC, easily liberatable CN-, As, Ba, Cd, Cl-, Co, Cr, Cr VI, Cu, F-, Hg, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn in aqueous eluates for the characterization of waste.
• Characterization of waste. Amendment to the CEN/TR 15310 package to add relevant examples form the extractive industries
• Characterization of waste. Determination of elementary carbon
• Characterization of waste. Framework for the preparation and application of a testing programme. General information on content tests and leaching tests
• Characterization of waste. Mineral Waste Utilisation

Rakentaminen

• ISO/NP 24636 Supplemental Test requirement of building-integrated photovoltaic(BIPV) module containing an addtional glass to a certified PV module
• ISO/NP 24642 Building integrated photovoltaic (BIPV) — Identification code for building-integrated photovoltaic modules
• ISO/NP 24812 Accessibility assessment for installation and maintenance of glass BIPV module
• ISO/NP 29584 Glass in building — Pendulum impact testing and classification of safety glass for use in buildings 
• prEN 13541 rev Glass in building. Security glazing. Testing and classification of resistance against explosion pressure
• prEN 410 rev Glass in building. Determination of luminous and solar characteristics of glazing
• prEN 675 rev Glass in building. Determination of thermal transmittance (U value). Heat flow meter method 
• prEN 356 rev Glass in building. Security glazing. Testing and classification of resistance against manual attack
• Glass in building. Interlayer films for laminated glass and laminated safety glass
• prEN 674 rev Glass in building. Determination of thermal transmittance (U value). Guarded hot plate method
• Glass in building. Vacuum insulating glass. Basic specification of products and evaluation methods of performances
• prEN 1063 rev Glass in building. Security glazing. Testing and classification of resistance against bullet attack
• prEN 356 rev Glass in building. Security glazing. Testing and classification of resistance against manual attack
• Glass in building — Smart CE-marking — Data template for the declaration of performance
• Glass in building. Determination of the thermal shock resistance of glass panes by calculation